The drop clip is made with an open slot to accommodate the cable without threads, while the open portion of the slot is well defined and supported by the edge to be able to support the stranded clip separate from the outgoing wire. On the other hand, the plate extends from one end of the slot and provides a source of engagement. Features of drop clips:
1. The maximum load it can carry is 500 to 700 lbs
2. It is made of stainless steel and has a three-piece structure
3. Support one and two pairs of telephone line
4. Detachable
When installing the drop clip, first run the cable in the housing and place the spacer on top of the cable through the raised embossing used on the cable. Then you need to insert the wedge into the housing on top of the spacer and pull to engage.
The small end of the wedge needs to engage the track on the large end of the housing. You can then place the loop wire on the B wire hook with the help of the loose wedge. Then, pull the hanging wire through the clip until the proper sidewalk or roadway clearance is reached. Then you need to grab the clip and pull it tight to secure it.
With its smart structure and form, drop clips are used to provide support for different objects on the cable. In most cases, it is capable of supporting one- and two-pair phone split lines.
EN
English
Polskie